MPO高密度光纤配线架1U2U3U

标准19"机架式安装，抽屉式双导轨设计，用于模块盒的集中管理。

Standard 19 " rackmounted, drawer type double rail design, for centralized managementof module box.

通过模块化设计实现端口数量的增长，提供光纤高密度连接能力。

Increase the numberof ports through modular design to provide fiber high densityconnectivity.

1U96芯光纤配线箱可安装24芯的4个MPO预端接盒

The 1U 96 core fiberdistribution box can be installed with 4 MPO pre termination boxeswith 24 cores

1U144芯光纤配线箱可安装12芯的12个MPO预端接盒

The 1U 144 corefiber distribution box can be installed with 12 core MPO pretermination boxes

采用优质冷轧板黑色磨砂喷塑。

Using high qualitycold-rolled sheet black frosted plastic spray.

光纤配线架设计包括了理线架和标签条。

The design ofoptical fiber distribution frame includes cable management frameand label strip.

配线架安装方便，管理方便。

The distributionframe is easy to install and manage.

是传统熔纤配线架的密度的六倍多，大大节约了机柜的空间，提高机柜利用率，为数据中心建设创造价值。

It is more than sixtimes of the density of the traditional fusion fiber distributionframe, which greatly saves the space of the cabinet, improves theutilization rate of the cabinet, and creates value for theconstruction of the data center.

物理特性 Physicalproperties

光纤类型：单模、万兆多模

Fiber type: singlemode, 10 Gigabit multimode

插入损耗MPO：典型值≤0.50dB，大值≤0.70dB

Insertion loss MPO:typical value ≤ 0.50db, large value ≤ 0.70db

分支端连接器：典型值≤0.20dB，大值≤0.30dB

Branch endconnector: typical value ≤ 0.20db, large value ≤ 0.30db 拔插次数MPO：500次

Times of pulling andinserting MPO: 500 times

分支端连接器：1000次

Branch endconnector: 1000 times 抗拉强度≥120N（0.9mm光缆除外）

Tensile strength ≥120N (except for 0.9mm optical cable) 工作温度：-20℃~70℃

Working temperature:- 20 ℃ ~ 70 ℃ 承受气压：70kPa--106kPa

Pressure: 70kpa --106kpa 光纤弯曲半径：≥40mm

Bending radius ofoptical fiber: ≥ 40mm